Basement Waterproofing in Brookhaven, PA
Water gets into a basement at specific points. We find where it comes in, then repair the masonry, cracks, and joints that let it through.
Where is the water in my basement coming from?
Basement water comes from a handful of places, and the fix depends on which one it is. Water can pass through open mortar joints and porous block, seep in at cracks in the wall or floor, rise at the joint where the wall meets the slab, or arrive from outside when gutters, downspouts, and grading send rain toward the house. A damp patch on the wall tells you where the water shows up. It does not always tell you where it starts.
We start by working out the path the water takes. Where the cause is masonry, such as failed mortar or a crack, we repair it. Where the cause is outside the wall, we tell you, because sealing the inside of a wall that keeps getting wet from outside rarely holds.
Signs of water coming in
- Dark or damp patches low on the wall
- White mineral powder on the wall or floor
- Water at the base of the wall after rain
- A musty smell, or peeling paint on masonry
- Cracks that stay wet or leave stains
How does water get into a masonry basement?
Three common paths. Each one calls for a different repair.
Through the wall
Damp or dark patches on stone, brick, or block. Open or sanding mortar joints. Mineral deposits on the face of the wall.
Repoint the failed joints, replace damaged units, and repair the cracks that let water through.
At cracks
A crack in the wall or floor that weeps or stains, often after heavy rain.
Repair the crack and the masonry around it, so the opening is closed and not just covered.
From outside
Water at the base of the wall after rain, with gutters, downspouts, or ground that slopes toward the house.
Usually not a masonry repair. We point it out so the cause gets fixed before any wall work.
When it keeps coming back: A coating painted over a wall that is still wet from the outside tends to blister and peel. We look for the source before we recommend a repair, so the repair has something to hold to.
From the first damp patch to a dry wall
Four steps, in order.
- 1
Look
Michael looks at the walls, the floor, and the outside of the house, because the cause is often not where the water shows.
- 2
Trace the source
We work out which path the water takes: through the wall, at a crack, or from outside.
- 3
Repair
Failed mortar is repointed, cracks and damaged masonry are repaired, and we point out any outside cause.
- 4
Follow up
We go over what was done and what to watch for after the next heavy rain.
What affects the price: how many places water is getting in, how much masonry has failed, whether the cause is inside or outside the walls, and how easy the area is to reach. We give a number after we see the basement.
Basement waterproofing across Brookhaven and Delaware County
K&S works out of Brookhaven, PA and takes basement jobs in these towns and the counties around them.
- Masonry is the core trade. Walls, joints, and cracks are what K&S repairs every day.
- Cause first. We work out where the water comes from before we recommend a repair.
- Led by Michael. He runs each job with his crew, from the first look to the last joint.
- Brookhaven, PA
- Havertown, PA
- Drexel Hill, PA
- Springfield, PA
- Wayne, PA
- Philadelphia, PA
- Chester, PA
- Radnor, PA
- Ardmore, PA
Tell us when you call
- Where the water shows: which wall, corner, or part of the floor
- When it appears: after rain, in spring, or all the time
- Whether gutters or downspouts empty near that wall
- Any earlier repairs or coatings
Questions about basement waterproofing in Brookhaven
How do I find where my basement leak starts?
Look at when and where it appears. Water low on a wall after rain often enters through mortar joints or a crack. Water at the base of the wall can come from gutters, downspouts, or ground sloping toward the house. We trace the path before recommending a repair, because the damp patch is only where the water shows.
Will repointing or sealing cracks stop my basement from leaking?
It can, when open joints and cracks are the way water gets in. Repair works when the source is the masonry itself. If the water comes from outside the wall, such as gutters or grading, masonry repair alone will not solve it, and we tell you that up front.
Is basement waterproofing the same as restoration?
They overlap but are not the same. Waterproofing is about stopping water. Restoration is about repairing the walls and floor that water has damaged. Failed mortar joints are both: they let water in and they show wall damage, so a repair often does both jobs at once.
Does paint or a coating on the wall stop water?
A coating on a wall that is still taking water from outside tends to blister and peel, because the water keeps pushing against it. Coatings can help once the source is dealt with, but they work as a finish and not as a fix. The first step is finding and repairing the entry point.
Can basement waterproofing work happen in winter?
Much of it can, because the work is indoors. Mortar needs to stay above roughly 40 degrees F while it sets, and a basement usually holds that. Water entry can also be easier to trace after a thaw or a heavy rain, which is when damp spots show up.
How much does basement waterproofing cost in Brookhaven?
The price depends on how many places water is getting in, how much masonry has failed, whether the cause is inside or outside the walls, and how easy the area is to reach. We do not quote a number without seeing the basement. Use Get a Quote to tell us what you see.
What areas do you serve for basement waterproofing?
K&S Masonry Restoration is based in Brookhaven, PA and works across Delaware County, including Havertown, Drexel Hill, Springfield, Chester, Wayne, Radnor, and Ardmore. We also work in Philadelphia, Montgomery County, and Chester County. If you are not sure your address is in range, ask when you get in touch. It is a quick answer.
Damp walls or water after rain? Let us trace it.
Tell us where the water shows up and when. Finding the source first is what keeps a repair from failing.