Epoxy Flooring in Brookhaven, PA
A sealed, seamless coating for concrete floors, put down over a floor that has been cleaned, repaired, and prepared first.
What is an epoxy floor, and does it suit a basement?
Epoxy flooring is a hard, seamless coating applied to a concrete slab. It seals the surface, resists staining, and is easy to sweep and mop, which is why it is common in basements and garages. How long it lasts depends less on the coating than on the floor under it. A coating only holds as well as it bonds to the slab, so cracks, spalls, old sealers, and dirt have to be dealt with first.
Moisture matters most in a basement. A slab that is still taking on water pushes against the coating from below and can lift it. That is why K&S, a masonry and concrete crew, looks at the slab and the walls around it before talking about color and finish.
Before epoxy goes down
- Cracks and pits in the slab patched and leveled
- Old paint, sealer, oil, and dirt removed
- The surface ground so the coating can bond
- Moisture coming through the slab dealt with first
How an epoxy floor goes in
Four stages, in order. Skipping the early ones is the usual reason a coating fails.
- 1
Prepare
The floor is cleaned and ground so the coating can bond. Old sealers, oil, and loose material are removed.
- 2
Repair
Cracks, pits, and spalled spots are patched, and the slab is checked for moisture.
- 3
Coat
The epoxy is applied in coats, with a finish chosen with you.
- 4
Cure
The floor stays clear while the coating cures. Foot traffic comes first and heavier loads later.
What affects the price: the size of the floor, how much repair the slab needs, how much preparation it takes, and the finish you choose. We give a number after we see the floor.
Where it goesWhich floors can be coated?
Epoxy suits sound concrete. What a floor needs first depends on where it is.
- Basement floorsA common choice for a finished or workshop basement. The slab is checked for moisture first, and walls that let water in are repaired before the floor is coated.
- Garage floorsSeals bare concrete against oil, salt, and tire marks. Cracks and pitted spots are repaired before the coating goes on.
- Other concrete floorsUtility rooms, workshops, and similar slabs follow the same stages: clean, repair, prepare, coat.
- Floors with damageA floor with deep cracks or spalling gets concrete repair first, so the coating has a sound base.See concrete repair
Epoxy flooring across Brookhaven and Delaware County
K&S works out of Brookhaven, PA and takes floor jobs in these towns and the counties around them.
- Masonry is the core trade. Concrete and masonry surfaces are what K&S works on every day.
- Floor first. Cracks, spalls, and moisture are dealt with before anything is coated.
- Led by Michael. He runs each job with his crew, from the first look to the last joint.
- Brookhaven, PA
- Havertown, PA
- Drexel Hill, PA
- Springfield, PA
- Wayne, PA
- Philadelphia, PA
- Chester, PA
- Radnor, PA
- Ardmore, PA
Tell us when you call
- Where the floor is: basement, garage, or another room
- About how big the floor is
- Any cracks, stains, or damp spots you can see
- Whether the floor has been painted or sealed before
Questions about epoxy flooring in Brookhaven
Does epoxy flooring work in a basement?
It can, when the slab is sound and dry enough. Moisture rising through the concrete is the main risk, because it pushes against the coating and can lift it. We check the floor and the walls around it for water first, and the cause gets repaired before any coating goes down.
How long does an epoxy floor installation take?
The work usually runs over several days, mostly because of preparation and curing. The floor is cleaned and ground, repaired, coated, and then left to cure. The exact schedule depends on the size of the floor, how much repair it needs, and the product used, and we give you the timing when we see the floor.
How soon can I walk on a new epoxy floor?
Most epoxy systems take light foot traffic after about a day, and heavier loads such as vehicles or furniture a few days later. The exact time depends on the product and the temperature of the room. We tell you when the floor is ready for each, and we ask that it stays clear until then.
Can epoxy be installed in winter?
Yes, in a heated space. Most epoxy products need the slab and the air to stay above about 50 degrees F to cure properly, so a heated basement works well and an unheated garage in January may not. Indoor basement floors are a good fit for the colder months.
What affects the price of an epoxy floor in Brookhaven?
The size of the floor, how much repair the slab needs, how much preparation it takes, and the finish you choose all change the price. We do not quote a number without seeing the floor. Use Get a Quote to tell us where the floor is and what condition it is in.
Do you repair cracks before coating the floor?
Cracks, pits, and spalled spots are repaired before any coating goes on, because a coating follows the surface under it. K&S is a masonry and concrete repair crew, so the repair and the coating are planned together. A floor with deep damage may need concrete repair first.
What areas do you serve for epoxy flooring?
K&S Masonry Restoration is based in Brookhaven, PA and works across Delaware County, including Havertown, Drexel Hill, Springfield, Chester, Wayne, Radnor, and Ardmore. We also work in Philadelphia, Montgomery County, and Chester County. If you are not sure your address is in range, ask when you get in touch. It is a quick answer.
Ready for a sealed concrete floor? Start with a look.
Tell us where the floor is and what shape it is in. The preparation decides how long the coating lasts.